 Carefully cut through the skin down to hole in the foam above the ballast tube. Only cut sides and back. Front is a hinge, and the cover should fit pretty snuggly in place. |
 Opening ballast cover. |
 Ballast cover opened. You may find that the ballast slugs don't slide freely any more. If they slide with a little bump on the side of the nose section then you're ok. Otherwise you'll probably need to grind the slugs down a bit, or use smaller slugs. |
 My Bluto covered. My digital camera doesn't do it justice. The purple is darker than it looks, the red is fluorescent red, and the yellow is well.. about that color. I will put some red on the top half of the tail so that I can tell which way is up, when it's edge on. I chose this color scheme for sheer obnoxiousness. |
 Bottom is pure black. |
 That's it. |